Recent Advances of Mechanical Performance and Oxidation Stability in Ultrahigh Molecular Weight Polyethylene for Total Joint Replacement: Highly Crosslinked and .ALPHA.-Tocopherol Doped-Reference-Cited by-同舟云学术

Recent Advances of Mechanical Performance and Oxidation Stability in Ultrahigh Molecular Weight Polyethylene for Total Joint Replacement: Highly Crosslinked and .ALPHA.-Tocopherol Doped

Published:2006 Issue:1 Volume:1 Page:107-123
ISSN:1880-9863
Container-title:Journal of Biomechanical Science and Engineering
language:en
Short-container-title:JBSE

Author:

SHIBATA Nobuyuki¹²,KURTZ Steven M.³⁴,TOMITA Naohide⁵

Affiliation:

1. Human Engineering and Risk Management Group, Institute of Industrial Health, Japan National Institute of Occupational Safety and Health

2. Department of Mechanical Engineering, Kanagawa Institute of Technology

3. Implant Research Center, School of Biomedical Engineering Science and Health Systems, Drexel University

4. Failure Analysis Associates, Exponent, Inc.

5. International Innovation Center, Kyoto University

Publisher

Japan Society of Mechanical Engineers

Subject

Biomedical Engineering

Link

http://www.jstage.jst.go.jp/article/jbse/1/1/1_1_107/_pdf

Reference83 articles.

1. Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty

2. (2) Kurtz, S., Mowat, F., et al. Prevalence of primary and revision total hip and knee arthroplasty in the United Stated (1990-2002). Journal of Bone and Joint Surgery, Vol. 87A, (2005), pp. 1487-1497.

3. (3) Charnley, J., Halley, D.K. Rate of wear in total hip replacements. Clinical orthopaedics, Vol. 112, (1975), pp. 170-179.

4. (4) Romaniuk, P.A., Luning, M., et al. The percutaneous insertion of a polyethylene catheter into the knee joint for combined arthrography. Radiologia Diagnostica, Vol. 10, No. 2, (1969), pp. 223-228.

5. (5) Freeman, M.A., Swanson, S.A., et al. Total replacement of knee using metal polyethylene two-part prosthesis. Proceedings of the Royal Society of Medicine, Vol. 65, No. 4, (1972), pp. 374-375.

Cited by 19 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evolutionary Steps in the Development of a Patient-specific Temporomandibular Joint Prosthesis;Craniomaxillofacial Research & Innovation;2022-08

2. Validation of a protocol based on Raman and infrared spectroscopies to nondestructively estimate the oxidative degradation of UHMWPE used in total joint arthroplasty;Acta Biomaterialia;2016-07

3. Quantification of silane grafting efficacy, weak IR vibration bands and percentage crystallinity in post e-beam irradiated UHMWPE;Polymer Bulletin;2016-06-03

4. Polyethylene for Total Joint Replacement Implants;Encyclopedia of Biomedical Polymers and Polymeric Biomaterials;2016-01-27

5. The Influence of Irradiation and Accelerated Aging on the Mechanical and Tribological Properties of the Graphene Oxide/Ultra-High-Molecular-Weight Polyethylene Nanocomposites;International Journal of Polymer Science;2016