Affiliation:
1. Qingdao Agricultural University, College of Mechanical and Electrical Engineering / China
2. Xinjiang Agricultural University, College of Mechanical and Electrical Engineering / China
3. Shandong Yuanquan Mechanical Co / China
Abstract
For the peanut combine harvester excavation process resistance, poor soil crushing effect and poor reliability of the problem, the excavation shovel optimization needs improvement. Firstly, a mechanical model of the resistance of the excavation shovel was established to investigate the key factors affecting the degree of resistance of the excavation shovel. Next, the design of the main parameters of the excavation shovel was done to determine the range of values of the main factors affecting the peanut excavation shovel. EDEM software was used to simulate and analyse the excavation process and to explore the influence law of excavation shovel parameters on the resistance. Improvements were made to the excavation shovel, discrete element simulation tests were used to demonstrate that the optimized excavation device had better resistance reduction and soil crushing than the original device. By designing a three-factor, three-level orthogonal simulation test, the best parameters for the excavation shovel were obtained: the shovel surface inclination is 20°, the excavation depth is 131mm, and the shovel surface width is 277mm. Field trials were conducted under the optimal combination of parameters to test the reliability of the improved digging shovel. Compared with the operating effectiveness of the original machine, the result was improved to some extent. It proves that the optimized design of excavating shovel is reasonable and can improve the operation effect of peanut harvester.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering,Food Science
Reference20 articles.
1. Chen Zhihua, Li Yaoming, Sun Xingzhao, (2005). Dynamic analysis and experiment of peanut excavating shovel （ 花 生 挖 掘 铲 动 力 学 分 析 与 试 验 ） , Transactions of the Society for Agricultural Machinery, Vol.36, Issue 11, pp. 59-63.
2. Chen Zhongyu, Gao Lianxing, Chen Charles et al., (2017). Status and development analysis of peanut harvesting mechanization technology in China and America（中美花生收获机械化技术现状与发展分析 Transactions of the Society for Agricultural Machinery, Vol.48, Issue 4, pp. 1-21.
3. Deng Weigang, Wang Chunguang, Sun Hong et al, (2014). Construction of mechanical model of potato excavator（马铃薯挖掘机挖掘铲力学模型构建）, Agricultural Mechanization Research，Vol.36, Issue 01,pp. 84-86.
4. Hang C, Gao X, Yuan M, et al. (2018). Discrete element simulations and experiments of soil disturbance as affected by the tine spacing of subsoiler. Biosystems Engineering, 168: 73-82.
5. Horabik J, Wiącek J, Parafiniuk P. et al. (2020), Calibration of discrete-element-method model parameters of bulk wheat for storage. Biosystems Engineering, 200: 298-314;
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献