THEORETICAL CONSIDERATIONS ON THE OPTIMIZATION OF THE WORKING PROCESS OF VARIABLE WIDTH PLOUGHS-Reference-Cited by-同舟云学术

THEORETICAL CONSIDERATIONS ON THE OPTIMIZATION OF THE WORKING PROCESS OF VARIABLE WIDTH PLOUGHS

Published:2021-12-30 Issue: Volume: Page:129-140
ISSN:2068-2239
Container-title:INMATEH Agricultural Engineering
language:en
Short-container-title:INMATEH

Author:

Nuƫescu Cristian¹,Gageanu Iuliana²,Cujbescu Dan²

Affiliation:

1. University Politehnica of Bucharest / Romania

2. INMA Bucharest / Romania

Abstract

The paper presents theoretical research conducted for the optimization of the working process of variable width ploughs. Thus, were determined multivariable regression functions for the traction force of the plough with variable working function of the control parameters: working depth, working width and working speed. The use of these theoretical considerations of the optimal points sought lead to the opportunity of making assessments on the possibilities to conduct their experimental validation. Conditions for an experimental plan were formulated to highlight such optimal points and the theoretical results were validated through experiments.

Publisher

INMA Bucharest-Romania

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering,Food Science

Reference19 articles.

1. Abbaspour-Gilandeh, M., Shahgoli, G., Abbaspour-Gilandeh, Y., Herrera-Miranda, M.A., Hernandez-Hernandez, J.L., Herrera-Miranda, I. (2020). Measuring and Comparing Forces Acting on Mouldboard Plow and Para-Plow with Wing to Replace Mouldboard Plow with Para-Plow for Tillage and Modelling It Using Adaptive Neuro-Fuzzy Interface System (ANFIS). Agriculture, 10, 633; doi:10.3390/agriculture10120633

2. Akbarnia, A., Mohammadi, A., Farhani, F., Alimardani, R. (2014). Simulation of draft force of winged share tillage tool using artificial neural network model. Agric Eng. Int. CIGR J., 16, 57–65.

3. Biriş, S., Vlăduţ, V., Bungescu, S., Paraschiv, G., (2007), Researches regarding the utilization of ante-molboard in the ploughs building, Proceedings of the 35 International Symposium on Agricultural Engineering "Actual Tasks on Agricultural Engineering", vol. 35, 85-96, Opatija / Croatia

4. Biriş, S., Maican, E., Vlăduţ, V., Paraschiv, G., Manea, M., Bungescu, S., (2008), Study regarding the soil particles kinematics during the ante-mouldboard tillage tools working process, Proceedings of the 36 International Symposium on Agricultural Engineering "Actual Tasks on Agricultural Engineering", vol.36, 115-126, Opatija / Croatia.

5. Bungescu, S., Biriş, S., Vlăduţ, V., Paraschiv, G., (2008), Researches regarding the stress distribution determination appearing on the lamellar mouldboard surface with a view to modelling and optimization, Proceedings of the 36 International Symposium on Agricultural Engineering "Actual Tasks on Agricultural Engineering", vol.36, 281-292, Opatija / Croatia

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. ENERGY CONSUMPTION EVALUATION OF ROTARY TILLER USING DYNAMIC MODELLING;INMATEH Agricultural Engineering;2022-12-31