LPG Tüplerinin Tozaltı Ark Kaynağında Kullanılan Kaynak Teli ve Kaynak Tozu Kombinasyonlarının Mekanik Özelliklere Etkisinin incelenmesi-Reference-Cited by-同舟云学术

LPG Tüplerinin Tozaltı Ark Kaynağında Kullanılan Kaynak Teli ve Kaynak Tozu Kombinasyonlarının Mekanik Özelliklere Etkisinin incelenmesi

Published:2022-06-30 Issue: Volume: Page:509-518
ISSN:2757-9255
Container-title:Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
language:tr
Short-container-title:

Author:

NUHOĞLU Uğur¹,MERT Tolga¹,TÜMER Mustafa²

Affiliation:

1. YILDIZ TEKNİK ÜNİVERSİTESİ

2. KOCAELİ ÜNİVERSİTESİ

Abstract

Liquefied petroleum gas (LPG) cylinder is a type of pressure vessel that used to store and transport liquefied gases. In this study, S460MC steel with a thickness of 1.50 mm and submerged arc welding method were used in the manufacturing of LPG cylinders. Selection of the welding consumables (wire, flux) and optimization of the welding parameters (current, voltage, travel speed) are the primary focus of the study. Selected welding parameters have been verified as a result of visual and radiographic (X-ray) tests and macroscopic examinations. In order to analyze the effects of welding consumables on mechanical properties, test specimens were prepared, then tensile and hardness tests were performed and it was observed that molybdenum element increased the mechanical strength. In order to fulfill the requirements of the LPG cylinder production standard, bursting & volumetric expansion tests and pressure fatigue tests were performed and the requirements were met.

Publisher

Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi

Reference23 articles.

1. 1. Caligulu, U., Türkmen, M., Tufanoğlu, E., Kejanli, H., 2017. P460-St52 Malzemelerin Tozaltı Kaynağında Amper Değerinin Etkisi. 2. Savunma Sanayi Sempozyumu, 6-7 Nisan 2017, Kırıkkale Üniversitesi, Kırıkkale.

2. 2. Tom, A, Pius, G.M., Joseph, G., Jose, J., Joseph, M.J., 2014. Design and Analysis of Lpg Cylinder. International Journal of Engineering & Applied Sciences (IJEAS), 6(2), 17-31.

3. 3. TS EN 14140, 2015. LPG Donanım ve Aksesuarları-Taşınabilir, Tekrar Doldurulabilir, Kaynaklı Çelik Tüpler-Alternatif Tasarım ve Ġmalat, Ankara.

4. 4. Sebestova, H., Hornik, P., Mrna, L., Dolezal, P., 2018. Microstructure and Mechanical Properties of Hybrid LasTIG Welds of HSLA Steel. 10th CIRP Conference on Photonic Technologies (LANE 2018), Brno, 743-747.

5. 5. Akay, A.A., Kaya, Y., Kahraman, N., 2013. Farklı Özellikteki Malzemelerin Tozaltı Ark Kaynak Yöntemi ile Birleştirilmesi ve Birleştirmelerin Tahribatlı ve Tahribatsız Muayenesi. SAÜ. Fen Bil. Der., 17(1), 85-96.