Abstract
Pine bark is a good source of natural polyphenolic compounds for wood adhesives. The objective of this study was to obtainthe most suitable solvent for extracting pine tannins in the preparation of tannin-formaldehyde plywood adhesives. Aqueousacetone, aqueous ethanol, aqueous NaOH and water as solvents were used to obtain crude tannins from pine bark. Thetannin content, sugar content and Stiasny number of the extracts were determined. Using the extracts from the solventextractions, synthesis of tannin-formaldehyde resin was carried out. Plywood panels were made using the synthesized resinsand the quality of the resins in plywood application determined. The quality of tannin-formaldehyde resins produced from thetannins were generally in close agreement with the chemical characteristics of the extracts obtained from the various solventextractions. The aqueous NaOH extraction although gave very high tannin yield (16.1%), its associated high sugar content(33.8%) and very low Stiasny number (49) resulted in poor quality resin. Similarly, although aqueous extraction gave a veryhigh Stiasny number (91), its low tannin yield (8.7%) might not be of commercial interest. The extraction process that gave ahigh tannin yield (12.9%) and a very good Stiasny number (81.5) with a corresponding good quality resin (shear strength =1.9 MPa, 22% delamination) was found for 60% aqueous ethanol extraction.
Publisher
University of Energy and Natural Resources
Subject
General Earth and Planetary Sciences,General Environmental Science
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献