The Influence of the Blading Surface Roughness on the Aerodynamic Behavior and Characteristic of an Axial Compressor

Abstract

The conversion of energy in an axial compressor is influenced in great measure by the surface quality of the blading. To achieve low flow losses, the roughness values of the blade surface must be below certain limits. However, the blade surface, which is hydraulically smooth on commissioning of the machine, is in many cases attacked by dirt, corrosion and erosion during operation. For investigation of the influence of the surface quality on the efficiency, flow rate, pressure ratio, and the shifting of the characteristic curves, systematic measurements were taken on a three-stage axial compressor with smooth and uniformly rough blading. The roughness was produced by applying loose emery grain of different grades.