Research on Proton Exchange Membranes for Improving Valve Regulated Sealed Lead-Acid Battery Cycling Performance-Reference-Cited by-同舟云学术

Research on Proton Exchange Membranes for Improving Valve Regulated Sealed Lead-Acid Battery Cycling Performance

Published:2019-11-05 Issue:3 Volume:17 Page:
ISSN:2381-6872
Container-title:Journal of Electrochemical Energy Conversion and Storage
language:en
Short-container-title:

Author:

Zhang Shao-Hui¹²,Go Kokswee³,Re Qing-Qing³,Wang Zhen-Bo³

Affiliation:

1. MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, No. 92 West-Da Zhi Street, Harbin 150001, China;

2. Materials Science and Engineering Research Center, Guangxi University of Science and Technology, No. 268 Dong-Huan Road, Guangxi, Liuzhou 545006, China

3. Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, No. 92 West-Da Zhi Street, Harbin 150001, China

Abstract

Abstract In this article, proton exchange membranes (PEMs) are used as separators for lead-acid batteries. Ion migration experiments are conducted to prove the efficacy of PEMs in blocking the passage of antimony ions. The cells are then assembled into a battery to undergo charge–discharge, life cycle, and electrolyte loss testing. The results show that PEMs are effective at reducing the migration of antimony ions from the cathode alloy grid to the anode while suppressing hydrogen formation and electrolyte loss, which greatly improves coulombic efficiency and cycle life of the battery.

Publisher

ASME International

Subject

Mechanical Engineering,Mechanics of Materials,Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electronic, Optical and Magnetic Materials

Link

http://asmedigitalcollection.asme.org/electrochemical/article-pdf/doi/10.1115/1.4045091/6438132/jeecs_17_3_031002.pdf

Reference19 articles.

1. Lead Alloys: Past, Present and Future;Bagshaw;J. Power Sources,1995

2. Microstructure Characterization and Corrosion Resistance Properties of Pb-Sb Alloys for Lead Acid Battery Spine Produced by Different Casting Methods;Seikh;PLoS One,2018

3. Influence of Silver on the Anodic Corrosion and Gas Evolution of Pb-Sb-As-Se Alloys as Positive Grids in Lead Acid Batteries;Tizpar;Appl. Surf. Sci.,2006

4. The Corrosion Inhibition and Gas Evolution Studies of Some Surfactants and Citric Acid on Lead Alloy in 12.5 M H2SO4 Solution;Tizpar;Appl. Surf. Sci.,2006

5. Influence of Antimony on the Electrochemical Behavior and the Structure of the Lead Dioxide Active Mass of Lead/Acid Batteries;Pavlov;J. Power Sources,1993