Real-Time IMEP Estimation and Control Using an In-Cylinder Pressure Sensor for a Common-Rail Direct Injection Diesel Engine
Author:
Oh Seungsuk1, Kim Junsoo1, Oh Byounggul1, Lee Kangyoon1, Sunwoo Myoungho1
Affiliation:
1. Department of Automotive Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791, Republic of Korea
Abstract
An in-cylinder pressure-based control method is capable of improving engine performance, as well as reducing harmful emissions. However, this method is difficult to be implemented in a conventional engine management system due to the excessive data acquisition and long computation time. In this study, we propose a real-time indicated mean effective pressure (IMEP) estimation method using cylinder pressure in a common-rail direct injection diesel engine. In this method, difference pressure integral (DPI) was applied to the estimation. The DPI requires only 180 pressure data points during one engine cycle from top dead center to bottom dead center when pressure data are captured at every crank angle. Therefore, the IMEP can be estimated in real time. To further reduce the computational load, the IMEP was also estimated using DPI at 2 deg, 3 deg, and 4 deg crank angle resolutions. Furthermore, based on the estimated IMEP, we controlled IMEP using a radial basis function network and linear feedback controller. As a result of the study, successful estimation and control were demonstrated through engine experiments.
Publisher
ASME International
Subject
Mechanical Engineering,Energy Engineering and Power Technology,Aerospace Engineering,Fuel Technology,Nuclear Energy and Engineering
Reference29 articles.
1. Livshiz, M., Kao, M., and Will, A., 2008, “Engine Torque Control Variation Analysis,” SAE Paper No. 2008-01-1016. 2. Satou, S., Nakagawa, S., Kakuya, H., Minowa, T., Nemoto, M., and Konno, H., 2008, “An Accurate Torque-Based Engine Control by Learning Correlation Between Torque and Throttle Position,” SAE Paper No. 2008-01-1015. 3. Rizzoni, G., Guezennec, Y., and Soliman, A., 2003, “Engine Control Using Torque Estimation,” U.S. Patent No. 0,167,118. 4. Heintz, N., Mews, M., Stier, G., Beaumont, A., and Noble, A., 2001, “An Approach to Torque-Based Engine Management Systems,” SAE Paper No. 2001-01-0269. 5. Jaine, T., Charlet, A., and Higelin, P., 2002, “High Frequency IMEP Estimation and Filtering for Torque Based SI Engine Control,” SAE Paper No. 2002-01-1276.
Cited by
14 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|