Investigation of a Newly Developed Slotted Bladed Darrieus Vertical Axis Wind Turbine: A Numerical and Response Surface Methodology Analysis

Abstract

Abstract In the past few years, wind energy became the most reliable and clean energy source throughout the world. This research broadly has focused on the 2D design of the conventional (without slot) wind turbine blades as well as slotted airfoil blades for places having a low power density of wind. For vertical axis wind turbines, optimum airfoil design plays a vital role in the aerodynamic efficiency of the wind turbine. To get better aerodynamic efficiency, a feasible airfoil criterion of selection, played an important role in the chosen blade design. In this paper, the conventional NACA0018 profile without slots and slotted airfoil profile is selected for measuring the turbine blade performance. The geometry of the computational domain has been created using the solid works software and the computational investigation has been performed using the computational fluid dynamics (CFD) solver ansys fluent 2020 R2 with the help of the shear stress transport (SST k–ω) turbulence model. The simulations are conducted initially with base airfoil and then varying the different structures of slots. After introducing slots in the base airfoil, efficiency was increased in terms of lift coefficient (Cl) and power coefficient (Cp) by 2.32% and 17.94%, respectively at the angle of attack of 15 deg. The results indicate that slotted airfoils have a better lift coefficient and power coefficient compared to an airfoil without a slot. The best turbine operating parameters were found to be 14.82 deg of angle of attack, 1.73 coefficient of lift, and 2.99 tip speed ratio (TSR) by using the response surface methodology (RSM). At these optimal settings, the best Cp response was 0.406. A field experiment was carried out to verify the modeling-optimization outcomes, and the results were within 7% of the model projected results. Thus, this type of slotted airfoil designed for a vertical axis wind turbine (VAWT) can be used to harness wind energy potential more efficiently.