Analysis of the Static Characteristics of a Self-Compensation Hydrostatic Spherical Hinge-Reference-Cited by-同舟云学术

Analysis of the Static Characteristics of a Self-Compensation Hydrostatic Spherical Hinge

Published:2015-10-01 Issue:4 Volume:137 Page:
ISSN:0742-4787
Container-title:Journal of Tribology
language:en
Short-container-title:

Author:

Xu Chundong¹,Jiang Shuyun²

Affiliation:

1. School of Mechanical Engineering, Southeast University, Nanjing 210096, China

2. School of Mechanical Engineering, Southeast University, 2 Southeast Road, Jiangning District, Nanjing 211189, China e-mail:

Abstract

This technical brief presents a new self-compensation hydrostatic spherical hinge to provide a large load capacity. The hinge consists of an upper part with self-compensation and a lower part with orifice restrictors. A comparative study of the static behavior is conducted between the self-compensation hydrostatic spherical hinge and the hydrostatic spherical hinge with orifice restrictors, the result shows that the self-compensation hydrostatic spherical hinge has an advantage in the static behavior over the hydrostatic spherical hinge with orifice restrictors, including a much larger load capacity, a smaller flow rate, and a smaller power loss.

Publisher

ASME International

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Link

http://asmedigitalcollection.asme.org/tribology/article-pdf/doi/10.1115/1.4030712/6286193/trib_137_04_044503.pdf

Reference29 articles.

1. Analysis of Static and Dynamic Characteristic of Hydrostatic Spherical Hinge;ASME J. Tribol.,2015

2. Integrated Shaft-Self Compensating Hydrostatic Bearing—Has Cylindrical Bore Provided Having Circumferential Grooves Connected to Pressure Supply and Drain Systems,1997

3. Low Profile Self-Compensated Hydrostatic Thrust Bearing—Has Self-Compensating Beating Mounted Circumferentially About Shaft Having Fluid Pressure Supply Groove Providing Fluid Communication,1996

4. Single Recess Spherical Hydrostatic Bearings;ASME J. Tribol,1970

5. Externally Pressurized Spherical Gas Bearings;ASLE Trans.,1961

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Combined Effect of Surface Irregularities and Applied Voltage on the Behavior of Hole-Entry Spherical Hybrid Journal Bearings Lubricated With an Electro-Rheological Fluid;Journal of Tribology;2024-07-19

2. Contactless measurement of hydrostatic bearing lubricating film using optical point tracking method;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2022-06-16

3. Study on surface roughness and piezo-viscous shear thinning lubricant effects on the performance of hole-entry hybrid spherical journal bearing;Tribology International;2022-04

4. Hydrostatic Bearing Characteristics Investigation of a Spherical Piston Pair with an Annular Orifice Damper in Spherical Pump;Coatings;2021-08-23

5. A review of the design and optimization of large-scale hydrostatic bearing systems;Engineering Science and Technology, an International Journal;2021-08