Reynolds-Averaged Navier–Stokes and Large-Eddy Simulation Investigation of Lean Premixed Gas Turbine Combustor

Abstract

Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulations (LES) of a Siemens scaled combustor are compared against comprehensive experimental data. The steady RANS simulation modeled one quarter of the geometry with 8 M polyhedral cells using the shear stress transport (SST) k-ω model. Unsteady LES were performed on the quarter geometry (90 deg, 8 M cells) as well as the full geometry (360 deg, 32 M cells) using the wall-adapting local eddy-viscosity (WALE) subgrid model and dynamic evaluation of model coefficients. Aside from the turbulence model, all other models are identical for the RANS and LES. Combustion was modeled with the flamelet generated manifold (FGM) model, which represents the thermochemistry by mixture fraction and reaction progress. RANS simulations are performed using Zimont and Peters turbulent flame-speed (TFS) expressions with default model constants, as well as the kinetic rate from the FGM. The flame-speed stalls near the wall with the TFS models, predicting a flame brush that extends to the combustor outlet, which is inconsistent with measurements. The FGM kinetic source model shows improved flame position predictions. The LES predictions of mean and rms axial velocity, mixture fraction, and temperature do not show improvement over the RANS. All three simulations overpredict the turbulent mixing in the inner recirculation zone, causing flatter profiles than measurements. This overmixing is exacerbated in the 90 deg case. The experiments show evidence of heat loss, and the adiabatic simulations presented here might be improved by including wall heat-loss and radiation effects.