Affiliation:
1. Department of Mechanical Engineering, University of Illinois, Urbana, Ill.
Abstract
As a pair of gears is loaded, the minimum oil-film thickness between the gear teeth decreases and can approach a magnitude equal to the magnitude of the surface roughness. Metal-to-metal contact then occurs between the microscopic peaks on both mating teeth surfaces. Therefore, the minimum thickness of the film separating the mating teeth surfaces may be considered as one of the criteria of capacity for a gear drive. A testing technique that was developed for measuring oil-film thickness between loaded gear teeth while running is presented in this paper. The voltage drop across a thin oil film that is required to cause an electrical discharge was used to determine the oil-film thickness. A specially designed machine containing a planetary gear train was used in these experiments. The relationships between the minimum oil-film thickness and the load transmitted by the gearing under certain conditions were determined using this method.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献