Plastic Limit Loads of Pad Reinforced Cylindrical Vessels Under Out-of-Plane Moment of Nozzle-Reference-Cited by-同舟云学术

Plastic Limit Loads of Pad Reinforced Cylindrical Vessels Under Out-of-Plane Moment of Nozzle

Published:2005-11-01 Issue:1 Volume:128 Page:49-56
ISSN:0094-9930
Container-title:Journal of Pressure Vessel Technology
language:en
Short-container-title:

Author:

Sang Z. F.¹,Wang H. F.¹,Xue L. P.²,Widera G. E. O.²

Affiliation:

1. Department of Mechanical and Power Engineering, Nanjing University of Technology, Nanjing, 210009, People’s Republic of China

2. Center for Joining and Manufacturing Assembly, Marquette University, Milwaukee, Wisconsin 53233

Abstract

The purpose of this work is to study the plastic limit load of pad reinforced cylindrical vessels with different d/D ratios under out-of-plane moment loading on a nozzle. Three full-scale test models were designed and fabricated. A 3-D nonlinear finite element numerical analysis was also performed. Data on plastic limit moment is obtained from load-displacement and load-strain responses. The results indicate that plastic limit loads determined by test (including displacement and strain measurements) and finite element analysis are in agreement.

Publisher

ASME International

Subject

Mechanical Engineering,Mechanics of Materials,Safety, Risk, Reliability and Quality

Link

http://asmedigitalcollection.asme.org/pressurevesseltech/article-pdf/128/1/49/5582751/49_1.pdf

Reference15 articles.

1. Pressure-Plus-Moment Limit-Load Analysis for a Cylindrical Shell Nozzle;Tabone;ASME J. Pressure Vessel Technol.

2. Influence of Pad Reinforcement on the Limit and Burst Pressure of a Cylinder-Cylinder Intersection;Xue;ASME J. Pressure Vessel Technol.

3. Roadbaugh, E. C. , 1988, “A Review of Area Replacement Rules for Pipe Connections in Pressure Vessels and Piping,” WRC Bulletin No. 335.

4. Ellyin, F., and Turkkan, N., 1973, “Limit in Plane Couple of Nozzles in Cylindrical Vessels and Branch,” Connection in piping systems, SMiRT, Berlin, Germany, Vol. 3, part G.

5. Kalnins, A. , 2001, “Guidelines for Sizing of Vessels by Limit Analysis,” Welding Research Council Bulletin, No. 464.

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Generation of interaction diagrams of pad-reinforced and non-padded vessel/nozzle structures via employing various plastic collapse techniques;International Journal of Pressure Vessels and Piping;2021-10

2. Efficient, scale-bridging simulation of ductile failure in a burst test using damage mechanics;International Journal of Pressure Vessels and Piping;2020-12

3. Elasto-Plastic Deformation of a Pressure Vessel with a Nonradial Branch Pipe and Determination of the Limit Load;Journal of Machinery Manufacture and Reliability;2018-11

4. Plastic Limit Load Analysis of Cylindrical Pressure Vessels with Different Nozzle Inclination;Journal of The Institution of Engineers (India): Series C;2015-12-16

5. Effect of Pad Reinforcement on the Plastic Limit Load for Nozzle Connection of Cylindrical Vessel;Journal of Pressure Vessel Technology;2014-10-15