The Influence of Different Rim Seal Geometries on Hot-Gas Ingestion and Total Pressure Loss in a Low-Pressure Turbine

Abstract

In order to prevent hot-gas ingestion into the rotating turbo machine’s inside, rim seals are used in the cavities located between stator- and rotor-disc. The sealing flow ejected through the rim seal interacts with the boundary layer of the main gas flow, thus playing a significant role in the formation of secondary flows which are a major contributor to aerodynamic losses in turbine passages. Investigations performed in the EU project MAGPI concentrate on the interaction between the sealing flow and the main gas flow and in particular on the influence of different rim seal geometries regarding the loss-mechanism in a low-pressure turbine passage. Within the CFD work reported in this paper static simulations of one typical low-pressure turbine passage were conducted containing two different rim seal geometries, respectively. The sealing flow through the rim seal had an azimuthal velocity component and its rate has been varied between 0–1% of the main gas flow. The modular design of the computational domain provided the easy exchange of the rim seal geometry without remeshing the main gas flow. This allowed assessing the appearing effects only to the change of rim seal geometry. The results of this work agree with well-known secondary flow phenomena inside a turbine passage and reveal the impact of the different rim seal geometries on hot-gas ingestion and aerodynamic losses quantified by a total pressure loss coefficient along the turbine blade. While the simple axial gap geometry suffers considerable hot-gas ingestion upstream the blade leading edge, the compound geometry implying an axial overlapping presents a more promising prevention against hot-gas ingestion. Furthermore, the effect of rim seals on the turbine passage flow field has been identified applying adequate flow visualisation techniques. As a result of the favourable conduction of sealing flow through the compound geometry, the boundary layer is less lifted by the ejected sealing flow, thus resulting in a comparatively reduced total pressure loss coefficient over the turbine blade.