Flashback Propensity of Syngas Flames at High Pressure: Diagnostic and Control

Abstract

Nowadays, the establishment of IGCC (integrated gasification combined cycle) plants, prompts a growing interest in synthetic fuels for gas turbine based power generation. This interest has as direct consequence the need for understanding of flashback phenomena for premixed systems operated with H2-rich gases. This is due to the different properties of H2 (e.g. reactivity and diffusivity) with respect to CH4 which lead to higher flame speeds in the case of syngases (mixtures of H2-CO). This paper presents the results of experiments at gas turbine like conditions (pressure up to 15 bar, 0.2 < Φ < 0.7, 577K < T0 < 674K) aimed to determine flashback limits and their dependence on the combustion parameters (pressure, inlet temperature and inlet velocity). For the experimental facility used for this work the back propagation of the flame is believed to happen into the boundary layer of the fuel/air duct. Flashback propensity was found to have an appreciable dependence on pressure and inlet temperature while the effects of inlet velocity variations are weak. Explanations for the dependence on these three parameters, based on consideration on laminar and turbulent flame speed data (from modeling and experiments), are proposed. Within the frame of this work, in order to avoid major damages, the experimental facility was equipped with an automatic control system for flashback described in the paper. The control system is able to detect flame propagation into the fuel/air supply, arrest it and restore safe operating conditions by moving the flame out of the fuel/air section without blowing it out. This avoids destruction of components (burner/mixing) and time consuming shut downs of the test rig.