Affiliation:
1. School of Mechanical and Power Engineering, East China University of Science and Technology, 130 Meilong Street, Shanghai 200237, China
Abstract
Abstract
In this article, a test method to determine the tube material properties and two methods to calculate the final hydraulic forming pressure of corrugated tubes are presented based on the plastic incremental theory. Numerical simulation and hydroforming experiment are carried out to demonstrate the reasonability of these methods. Simulation results show that tube force state during corrugated tube hydroforming is similar to that during tube local free hydraulic bulge. By comparison of final forming pressure, respectively, obtained from calculation, and hydroforming experiment, all of these methods are proved reasonable. Numerical simulation results also indicate that the two calculation methods still retain accuracy under different transition filet radius, although transition filets are ignored in calculation of final hydraulic forming pressure calculation.
Subject
Mechanical Engineering,Mechanics of Materials,Safety, Risk, Reliability and Quality
Reference23 articles.
1. The Influence of Artificial Roughness Shape on Heat Transfer Enhancement: Corrugated Tubes, Dimpled Tubes and Wire Coils;Appl. Therm. Eng.,2012
2. Experimental Investigation on the Convective Heat Transfer in Straight and Coiled Corrugated Tubes for Highly Viscous Fluids: Preliminary Results;Int. J. Heat Mass Transfer,2012
3. Analysis of Carrying Capacity for Hydroformed Corrugated Tubes;J. Mater. Sci. Technol.,2013
4. On the Characteristics of Tubular Materials for Hydroforming-Experimentation and Analysis;Int. J. Mach. Tools Manuf.,2001
5. Evaluation of Tube Formability and Material Characteristics: Hydraulic Bulge Testing of Tubes;J. Mater. Process. Technol.,2000
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献