Numerical Analysis of High Frequency Transverse Instabilities in a Can-Type Combustor

Abstract

Abstract Dry low emissions (DLE) systems are well-known to be susceptible to thermoacoustic instabilities. In particular, transverse, spinning modes of high frequency may appear, and lead to severe damage in a matter of seconds. The thermoacoustic response of an engine is usually specific to the combustor geometry, operating conditions and difficult to reproduce at the lab-scale. In this work, details of high frequency dynamics (HFD) observed during the early development phase of a new DLE system are provided, where a multipeaked spectrum was noticed during testing. Beginning with an analysis of the measured pressure spectra from three different concepts, an analytical model of the clockwise and anticlockwise transverse waves was fitted to the experimental data using a nonlinear curve fitting approach to produce a simple yet useful understanding of the phenomena. A flamelet-based large eddy simulation (LES) of the entire combustion system was used to complement this analysis and confirm the mode shapes using dynamic mode decomposition (DMD). Both approaches independently identified a spinning second-order mode as the dominant one in the high frequency regime. The LES indicates the coupling of a distortion of swirl profile with a precessing vortex core as a possible cause for the onset of instability. With regard to modeling sensitivities, it is shown that subgrid scale combustion modeling has a strong impact on predicted amplitudes. Ultimately, a thickened-flame model with a modified efficiency function provided consistent results.