Liquid Metal Ink Enabled Rapid Prototyping of Electrochemical Sensor for Wireless Glucose Detection on the Platform of Mobile Phone

Abstract

Pervasive detection of blood glucose is rather critical for the real-time disease diagnosis which would provide valuable guidance for treatment planning. Here, we established a health care platform for this purpose through incorporating the glucose detection with liquid metal printed sensor and the smart phone monitoring system together. The liquid metal ink composed of bismuth indium stannic (BIS) alloy was identified as an appropriate sensor material to be quickly written or printed on polyvinyl chloride (PVC) substrate at around 59 °C to form desired electrodes. It thus eliminated the complicated procedures as usually required in conventional sensor fabrication strategies. The alloy electrodes were characterized via cyclic voltammetry to demonstrate their practical functionality. Further, unlike using the commonly adopted glucometer, a smart phone was developed as the data acquisition and display center to help improve the portability and ubiquitous virtue of the detection system. Glucose solution in different concentrations was assayed via this platform. It was shown that there is a good linear relationship between the concentration and the integral value of the curve recorded by the mobile phone, which confirms the feasibility of the present method. This quantitative point-of-care system has pervasive feature and is expected to be very useful for future low-cost electrochemical detection.