Statistical Properties of Round, Square, and Elliptic Jets at Low and Moderate Reynolds Numbers

Author:

Aleyasin Seyed Sobhan1,Tachie Mark Francis2,Koupriyanov Mikhail3

Affiliation:

1. Department of Mechanical Engineering, University of Manitoba, Winnipeg, MB R3T 5 V6, Canada e-mail:

2. Department of Mechanical Engineering, University of Manitoba, Winnipeg, MB R3T 5 V6, Canada

3. Price Industries Limited, Winnipeg, MB R2K 3Z9, Canada

Abstract

An experimental study was conducted to investigate the effect of nozzle geometries on the statistical properties of free orifice jets at low and moderate Reynolds numbers. The studied cross sections were round, square, and ellipses with aspect ratios of 2 and 3. For each jet, detailed velocity measurements were made using a particle image velocimetry (PIV) system at Reynolds numbers of 2500 and 17,000. The results showed that at both Reynolds numbers, the elliptic jets had relatively higher velocity decay and jet spreading; however, the nozzle geometry effects were more pronounced at Re = 17,000 than at Re = 2500. Analysis of the swirling strength revealed that the rotational motions induced by vortices within the minor planes of the elliptic jets were stronger than observed in the major planes, square and round jets which were consistent with the relatively higher spreading observed in the minor planes. It was observed that the streamwise locations of the switchover points were independent of Reynolds number but are a strong function of aspect ratio. Based on the present results and those documented in the literature, a linear correlation was proposed for the location of axis-switching in orifice jets. Due to the axis-switching phenomena, a sign change was observed in the distribution of the Reynolds shear stress in the major planes of the elliptic jets. This results in the existence of regions with negative eddy viscosity in the near field regions, an observation that has an important implication for the predictive capabilities of standard eddy viscosity models.

Publisher

ASME International

Subject

Mechanical Engineering

Cited by 18 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

1. Direct numerical simulation of turbulent jet in regular waves: A comparison between circular and non-circular cross-sections;Ocean Engineering;2023-11

2. A comparative study of circular and rectangular bended plunging jets;Experimental Thermal and Fluid Science;2023-07

3. Dynamics and Entrainment Mechanism of the Jet Flows from an Elliptical Nozzle: Time-Resolved Tomographic PIV Measurements;2023-03-15

4. An experimental investigation on plunging jets of different geometries;Proceeding of 10th International Symposium on Turbulence, Heat and Mass Transfer, THMT-23, Rome, Italy, 11-15 September 2023;2023

5. Effect of sleeve orifices ratio on flow performance and hydrodynamic noise in the two-stage sleeve control valve;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2022-04-07

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3