Experimental and Simulation Results of a Cam and a Flat-Faced Follower Mechanism-Reference-Cited by-同舟云学术

Experimental and Simulation Results of a Cam and a Flat-Faced Follower Mechanism

Published:2017-09-07 Issue:6 Volume:12 Page:
ISSN:1555-1415
Container-title:Journal of Computational and Nonlinear Dynamics
language:en
Short-container-title:

Author:

Yousuf Louay S.¹,Marghitu Dan B.²

Affiliation:

1. Assistant Professor Department of Mechanical Engineering, Auburn University, Auburn, AL 36849 e-mail:

2. Professor Department of Mechanical Engineering, Auburn University, Auburn, AL 36849 e-mail:

Abstract

In this study, a cam and a flat-faced follower system with impacts and friction at the contact points are analyzed. The dynamic analysis has been done by simulating the follower displacement at a uniform cam angular velocity. Impact and friction are considered to determine the Lyapunov exponent based on different follower guides' clearances and cam rotational speeds. The simulation analysis has been carried out using solidworks. An experimental procedure is developed to capture the follower position through high-resolution optical markers mounted on the moving link. The experimental results are compared with the simulation results.

Publisher

ASME International

Subject

Applied Mathematics,Mechanical Engineering,Control and Systems Engineering,Applied Mathematics,Mechanical Engineering,Control and Systems Engineering

Link

http://asmedigitalcollection.asme.org/computationalnonlinear/article-pdf/doi/10.1115/1.4035824/6110016/cnd_012_06_061001.pdf

Reference27 articles.

1. Application of the Nonsmooth Dynamics Approach to Model and Analysis of the Contact-Impact Events in Cam-Follower Systems;Nonlinear Dyn.,2012

2. Dynamic Stability Analysis of a Flexible Cam Mechanism Using a One-Degree-Of-Freedom Mode;Proc. Inst. Mech. Eng., Part C,2009

3. Effect of Eccentricity on the Speed Fluctuation of Cam Mechanisms With Translating Followers;ASME J. Mech., Trans., and Automation,1988

4. An Analysis Using Offset Curves for Profiles, Manufacturing and Errors of Plane Cams;JSME Int. J. Ser. C, Dyn., Control, Rob., Des. Manuf.,1993

5. Exact Response Analysis and Dynamic Design of Cam-Follower Systems Using Laplace Transforms;ASME J. Mech. Des.,1997

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of Different Material Properties on the Nonlinear Dynamics Phenomenon of Cam-Follower Mechanism;Chaos Monitoring in Dynamic System: Analysis and Applications [Working Title];2023-09-09

2. Nonlinear dynamics investigation of contact force in cam–follower system using Lyapunov exponent parameter, power spectrum analysis, and poincare’ maps;Australian Journal of Mechanical Engineering;2023-04-27

3. Investigation of chaos in a polydyne cam with flat-faced follower mechanism;Journal of King Saud University - Engineering Sciences;2021-11

4. Nonlinear dynamics behavior of cam-follower system using concave curvatures profile;Advances in Mechanical Engineering;2020-09

5. An LMI-based design of a robust state-feedback control for the master-slave tracking of an impact mechanical oscillator with double-side rigid constraints and subject to bounded-parametric uncertainty;Communications in Nonlinear Science and Numerical Simulation;2020-03