Affiliation:
1. Department of Mechanical Engineering and Science, Tokyo Institute of Technology, 2-12-1 O-okayama, meguro-ku, Tokyo 152, Japan
Abstract
Static and dynamic characteristics of an externally pressurized porous annular thrust gas bearing (PATGB), which has a thin restricted surface layer, are investigated by numerical analysis and experiment. In the analysis, it is assumed that the fluid flow obeys Darcy’s law in the porous material, restricted with Darcy’s restrictor (Darcy-Darcy model) or orifice restrictor (Darcy-Orifice model) in the surface layer. From experimental investigation, it is found that the theoretical results calculated by the Darcy-Darcy model agree with the experimental data better than those of the Darcy-Orifice model. Based on the Darcy-Darcy model, the unique relationships among the design parameters, which can provide the maximum damping ratio, were derived as functions of feeding parameter under the conditions of allowable static stiffness and the local minimum dynamic stiffness. Considering the dimensionless mass of the body supported by the bearing, an optimal design method is proposed to maximize the damping ratio at the natural frequency, while maintaining the required stiffness in the low frequency region.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials
Reference16 articles.
1. Chang H. S. , WangZ. S., and SunD. C., 1988, “An Experimental Investigation of the Stability of Externally Pressurized Gas-Lubricated Porous Thrust Bearings,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, Vol. 95, No. 2, pp. 630–637.
2. Gargiulo E. P. , and GilmourP. W., 1968, “A Numerical Solution for the Design of Externally Pressurized Porous Gas Bearings; Thrust Bearings,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, Vol. 90, No. 4, pp. 810–817.
3. Iwato, T., Yoshimoto, S., and Anno, Y., 1994, “Experimental Characteristics of Aerostatic Porous Bearing,” The 71st JSME Spring Annual Meeting, Tokyo, Vol. (IV), No. 940–10, pp. 211–213.
4. Iwato T. , and YoshimotoS., 1996, “Static and Dynamic Characteristics of Circular Aerostatic Porous Thrust Bearing,” Trans. JSME, Ser. C, Vol. 62, No. 593, pp. 276–283.
5. Kawashima I. , TogoS., SatoS., and TamadaN., 1990, “Study on Characteristics of Porous Ceramic Gas Bearings,” JPSE, Vol. 56, No. 10, pp. 1853–1858.
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献