Affiliation:
1. College of Chemical Engineering, China University of Petroleum, Qingdao 266555, China e-mail:
Abstract
Layered cylindrical vessels are widely used in process industries. The weld clad is applied before the girth welding of layered-to-layered sections. In this paper, a numerical method was used to predict residual stresses in a layered-to-layered joint with weld clad. The results showed that high residual stresses were generated in the weld and heat affect zone (HAZ), and a discontinuous stress distribution was generated. The through-wall axial residual stress at the weld centerline (WCL) was predominately tensile. The axial residual stress in each layer at the HAZ demonstrated a bending type distribution. The through-wall hoop residual stress at the WCL was predominately compressive in the V-groove zone, and it was tensile in the U-groove zone. The weld clad can decrease the peak residual stress in the tip of the interlayer gaps.
Subject
Mechanical Engineering,Mechanics of Materials,Safety, Risk, Reliability and Quality
Reference17 articles.
1. The Explosion Reason Analysis of Urea Reactor of Pingyin;Eng. Failure Anal.,2009
2. Numerical Analysis of GTA Welding Process With Emphasis on Post-Solidification Phase Transformation Effects on the Residual Stresses;Mater. Sci. Eng., A,1998
3. Role of Residual Stresses Induced by Industrial Fabrication on Stress Corrosion Cracking Susceptibility of Austenitic Stainless Steel;Mater. Des.,2011
4. Analyses of Residual Stresses on Stamped Valves by X-Ray Diffraction and Finite Elements Method;J. Mater. Process. Technol.,2006
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献