A Model for Predicting the Heat Flow into the Workpiece in Dry Drilling-Reference-Cited by-同舟云学术

A Model for Predicting the Heat Flow into the Workpiece in Dry Drilling

Published:2002-10-23 Issue:4 Volume:124 Page:773-777
ISSN:1087-1357
Container-title:Journal of Manufacturing Science and Engineering
language:en
Short-container-title:

Author:

Bono Matthew¹,Ni Jun¹

Affiliation:

1. Department of Mechanical Engineering, University of Michigan, 1023 H.H. Dow Building, 2300 Hayward Street, Ann Arbor, MI 48109

Abstract

A model is developed for predicting the heat that flows into the workpiece during dry drilling processes. The model can be applied to any drill of known geometry. The measured drilling thrust and torque are used as inputs in an oblique cutting analysis, and an advection heat partition model is developed to calculate heat flux loads on a finite element model of the workpiece. Experiments using embedded thermocouples have verified that the model accurately predicts the temperature field in the workpiece for a range of drilling speeds and feeds.

Publisher

ASME International

Subject

Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Control and Systems Engineering

Link

http://asmedigitalcollection.asme.org/manufacturingscience/article-pdf/124/4/773/5732576/773_1.pdf

Reference18 articles.

1. Schmidt, A. O., and Roubik, J. R., 1949, “Distribution of Heat Generated in Drilling,” Trans. ASME, 71, pp. 245–252.

2. Kagiwada, T., and Kanauchi, T., 1988, “Numerical Analysis of Cutting Temperatures and Flowing Ratios of Generated Heat,” JSME Int J-Series III, 31, pp. 625–633.

3. Haan, D. M., Batzer, S. A., Olson, W. W., and Sutherland, J. W., 1997, “An Experimental Study of Cutting Fluid Effects in Drilling,” J Mat Proc Tech, 71, pp. 305–313.

4. Loewen, E. G., and Shaw, M. C., 1954, “On the Analysis of Cutting-Tool Temperatures,” Trans. ASME, 76, pp. 217–231.

5. Carslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heat in Solids, Oxford University Press.

Cited by 52 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Establishment of CFRP drilling simulation model considering heat accumulation effect and study on its delamination damage;The International Journal of Advanced Manufacturing Technology;2024-08-07

2. A review of sustainable hybrid lubrication (Cryo-MQL) techniques in machining processes;The International Journal of Advanced Manufacturing Technology;2024-02-02

3. Establishment of CFRP drilling simulation model considering heat accumulation effect and study on its delamination damage;2023-11-14

4. Prediction of transient temperature at bit-rock interface using numerical modelling approach and optimization;International Journal on Interactive Design and Manufacturing (IJIDeM);2023-10-12

5. The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach;The International Journal of Advanced Manufacturing Technology;2023-04-15