Affiliation:
1. Osaka Sangyo University
2. Osaka Institute of Technology
Abstract
Abstract
Experiments on a transmission error, having a period of one revolution of the belt in polychloroprene rubber timing belts, were performed under a quasi-static condition and an initial tension. The experimental results were compared with the computed results obtained using the measurement results of the production error in the belt. It was confirmed that the transmission error was mainly caused by a single pitch error, a change in cross-sectional area of the load carrying cords and a change in modulus of elasticity for one revolution of the belt. As the experimental results coincided quite well with the computed ones, it was concluded that the measurement methods for the single pitch error and the belt elongation factor, and the arrangement methods of these values used to compute the transmission error were right. Further, it was found that the transmission error due to the production error in the belt lessens when the initial tension becomes smaller.
Publisher
American Society of Mechanical Engineers
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献