Affiliation:
1. Division of Machine Elements, Lulea˚ University of Technology, S-971 87 Lulea˚, Sweden
Abstract
When calculating film thickness and friction in elastohydrodynamically lubricated contacts, assuming a non-Newtonian fluid, the lubricant limiting shear stress is an essential parameter. It influences minimum film thickness and determines traction in the contact. The limiting shear stress is pressure dependent according to the Johnson and Tevaarwerk equation: τL=τ0+γp The limiting shear stress-pressure coefficient γ has in a previous screening investigation been shown to depend on several parameters: oil type, oil viscosity at + 40°C, maximum contact pressure and temperature. In the present investigation, the preliminary data is used together with response surface methodology. With these results in mind, further experiments are made and an empirical model is built. This paper presents a new model for γ which is valid for two types of oil (a polyalphaolefine with diester and a naphthenic oil) with different viscosities at +40°C. The model incorporates the influence of maximum contact pressure and oil temperature on γ. The measurements on which the model is based were carried out at temperatures ranging from −20 to + 110°C. The pressure range was 5.8–7 GPa and the shear rate was about 106 s−1.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials
Cited by
25 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献