Effect of NGV Lean Under Influence of Inlet Temperature Traverse

Abstract

One of the most widely studied parameters in turbine blade shaping is blade lean, i.e. the tangential displacement of spanwise sections. However, there is a lack of published research that investigates the effect of blade lean under non-uniform temperature conditions (commonly referred to as a ‘hot-streak’) that are present at the combustor exit. Of particular interest is the impact of such an inflow temperature profile on heat transfer when the NGV blades are shaped. In the present work a computational study has been carried out for a transonic turbine stage using an efficient unsteady Navier-Stokes solver (HYDRA). The configurations with a nominal vane and a compound leaned vane under uniform and hot-streak inlet conditions are analysed. After confirming the typical NGV loading and aero-loss redistributions as seen in previous literature on blade lean, the focus has been directed to the rotor aerothermal behavior. Whilst the overall stage efficiencies for the configurations are largely comparable, the results show strikingly different rotor heat transfer characteristics. For a uniform inlet, a leaned NGV has a detrimental effect on the rotor heat transfer. However, once the hot-streak is introduced, the trend is reversed; the leaned NGV leads to favourable heat transfer characteristics in general and for the rotor tip region in particular. The possible causal links for the observed aerothermal features are discussed. The present findings also highlight the significance of evaluating NGV shaping designs under properly conditioned inflow profiles, rather than extrapolating the wisdom derived from uniform inlet cases. The results also underline the importance of including rotor heat transfer and coolability during the NGV design process.