Quantification of the Long-Term Performance of Steels T91 and 316L in Oxygen-Containing Flowing Lead-Bismuth Eutectic at 550°C-Reference-Cited by-同舟云学术

Quantification of the Long-Term Performance of Steels T91 and 316L in Oxygen-Containing Flowing Lead-Bismuth Eutectic at 550°C

Published:2010-05-27 Issue:8 Volume:132 Page:
ISSN:0742-4795
Container-title:Journal of Engineering for Gas Turbines and Power
language:en
Short-container-title:

Author:

Schroer Carsten¹,Konys Juergen¹

Affiliation:

1. Institut fuer Materialforschung III, Karlsruher Institut fuer Technologie (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany

Abstract

The long-term performance of ferritic/martensitic steel T91 and austenitic 316L in oxygen-containing flowing lead-bismuth eutectic at 550°C was investigated by exposing the materials for up to 15,000 h in the CORRIDA loop. The velocity of the liquid-metal flow was 2 m/s and the concentration of dissolved oxygen averaged 1.6×10−6 mass %. The resulting corrosion processes and products were analyzed and quantified using metallographic methods.

Publisher

ASME International

Subject

Mechanical Engineering,Energy Engineering and Power Technology,Aerospace Engineering,Fuel Technology,Nuclear Energy and Engineering

Link

http://asmedigitalcollection.asme.org/gasturbinespower/article-pdf/doi/10.1115/1.4000364/5707395/082901_1.pdf

Reference13 articles.

1. Van den Bosch, J., and Almazouzi, A., 2005, “Procurement and Characterisation of T91 and SS316L Plates,” SCK-CEN Report No. SCK-CEN-R-4197.

2. Schroer, C., Voss, Z., Novotny, J., and Konys, J., 2006, “Quantification of the Degradation of Steels Exposed to Liquid Lead-Bismuth Eutectic,” Forschungszentrum Karlsruhe Report No. FZKA 7224 (http://bibliothek.fzk.de/zb/berichte/FZKA7224.pdf).

3. Oxidation of Steel T91 in Flowing Lead-Bismuth Eutectic (LBE) at 550°C;Schroer;J. Nucl. Mater.

4. Schroer, C., and Konys, J., 2007, “Physical Chemistry of Corrosion and Oxygen Control in Liquid Lead and Lead-Bismuth Eutectic,” Forschungszentrum Karlsruhe Report No. FZKA 7364 (http://bibliothek.fzk.de/zb/berichte/FZKA7364.pdf).

5. Oxidation Mechanism of a Fe-9Cr-1Mo Steel by Liquid Pb-Bi Eutectic Alloy (Part I);Martinelli;Corros. Sci.

Cited by 65 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Corrosion of F/M steels and austenitic steels in Pb-Mg at different temperatures;Nuclear Materials and Energy;2024-09

2. New insights into the corrosion mechanism of 316Ti austenitic steel exposed to 550 ℃ lead-bismuth eutectic with 5×10-6 wt.% and 5×10-7 wt.% oxygen concentration;Corrosion Science;2024-09

3. Microstructural evolution of the inner oxide layer of a Si-modified austenitic stainless steel exposed to oxygen-saturated lead-bismuth eutectic (LBE): Toward the origin of LBE penetration;Corrosion Science;2024-08

4. High-temperature corrosion behavior of 316 H stainless steel in lead-bismuth eutectic containing cesium;Corrosion Science;2024-08

5. Corrosion kinetics of T91 steel under low oxygen conditions (10−7 wt% O) in lead-bismuth eutectic at 500 °C;Materials Today Communications;2024-06