Affiliation:
1. Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX 78712
Abstract
A numerical investigation of premixed combustion within a highly porous inert medium is reported. Specifically, results of a numerical model using detailed chemical kinetics and energy exchange between the flowing gas and the porous solid are presented. The current formulation differs from prior models of this type of combustion in that multistep kinetics is used and a better description of the thermophysical properties of the solid is applied in the present model. It was found that the preheating effect increases strongly with increasing convective heat transfer and with increasing effective thermal conductivity of the solid. The convective heat transfer is expected to increase with increasing number of cells per unit length of porous matrix but the absorption coefficient decreases with increasing cell size and decreasing cell density. Numerical simulations using baseline properties indicate that the lean limit can be extended to an equivalence ratio of about 0.36 for a methane–air flame and that the peak flame temperature is generally higher than the adiabatic flame temperature. The latter effect is predicted to be more pronounced at lower equivalence ratios.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Cited by
58 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献