On the Structural Response of a Flexible Pipe With Damaged Tensile Armor Wires

Abstract

This paper studies the structural response of a 6.0″ flexible pipe under pure tension considering two different situations: the pipe is intact or has five wires broken in its outer tensile armor. A three-dimensional nonlinear finite element model devoted to analyze the local mechanical response of flexible pipes is employed in this study. This model is capable of representing each wire of the tensile armors and, therefore, localized defects, including total rupture, may be adequately represented. Results from experimental tests are also presented in order to validate the theoretical estimations. The theoretical and experimental results indicate that the imposed damage reduced the axial stiffness of the pipe. High stress concentrations in the wires near the damaged ones were also observed and, furthermore, the stresses in the inner carcass and the pressure armor are affected by the imposed damage, but, on the other hand, the normal stresses in the wires of the inner tensile armor are not.