A Discrete Element Model of High-Pressure Torsion Test to Assess the Effect of Particle Characteristics in the Interface

Abstract

Abstract Sand particles have been used since the early stages of the railway industry to increase adhesion at the wheel–rail contact. However, there is a limited understanding of how sand particle characteristics affect the tribological performance of the wheel–rail contact. In this work, the high-pressure torsion test used as a small-scale simulation of the interface is numerically modeled using the discrete element method (DEM). The DEM model is then utilized to investigate the effect of different particle characteristics on the frictional performance of wheel–rail contact which can provide more insight into micromechanical observations. The effects of various particle characteristics including their size, their number, the number of fragments the particles break into, and the parameters defining the behavior of the bonds between particle fragments on the coefficient of traction (COT) are systematically investigated. Results show that, in dry contacts, the coefficient of traction decreases when the size or number of sand particles increases. This can be attributed to the formation of weak shear bands between the fragments. Further investigation is needed for wet- and leaf-contaminated contacts. It is also found that the COT is more sensitive to the stiffness of the bond between the fragments of a broken particle compared to the strength of the bond. A limiting value for bond strength was identified, beyond which the sand particles exhibited ductile behavior rather than the expected brittle fracture. The findings from this study can be useful for future research on adhesion management in wheel–rail contact and the modeling approach can be scaled up to the full contact.