Affiliation:
1. National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44135
Abstract
Spur gear endurance tests were conducted with six lubricants using a single lot of consumable-electrode vacuum melted (CVM) AISI 9310 spur gears. The sixth lubricant was divided into four batches each of which had a different additive content. Lubricants tested with a phosphorous-type load carrying additive showed a statistically significant improvement in life over lubricants without this type additive. The presence of sulphur type antiwear additives in the lubricant did not appear to affect the surface fatigue life of the gears. No statistical difference in life was produced with those lubricants of different base stocks but with similar viscosity, pressure-viscosity coefficients and antiwear additives. Gears tested with a 0.1 wt percent sulfur and 0.1 wt percent phosphorus EP additives in the lubricant had reactive films that were 200 to 400 Å (0.8 to 1.6 μin) thick.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献