Affiliation:
1. Department of Mechanical Engineering, Indian Institute of Technology, New Delhi-16, India
2. ITMMEC, Indian Institute of Technology, New Delhi-16, India
Abstract
A closed-form pressure distribution, using a combination of short- and long-bearing approximations, is proposed for dynamically loaded journal bearings. The angles for start and finish of positive pressure curve are determined employing simple analytical equations. The mobility method, based on the suggested pressure distribution is easy to use, predicts results of acceptable accuracy and the execution time is comparable to that required for the short bearing approximation. This paper also provides a conceptually simple analytical method for evaluating angular location of the instantaneous maximum pressure using proposed closed form pressure distribution. Simple algebraic equations are derived to obtain the instantaneous maximum pressure in dynamically loaded bearings directly, without involving any iteration. To illustrate the validity of present study, a connecting rod big end bearing and two crankshaft main bearings are analyzed. The mobility components, minimum film thickness and maximum pressure are plotted over a load cycle and compared with established analytical and curve fit methods. The results are also compared with those obtained using finite element method.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials
Reference16 articles.
1. Booker, J. F., 1965, “Dynamically Loaded Journal Bearings: Mobility Method of Solution,” ASME Journal of Basic Engineering, pp. 537–546.
2. Booker
J. F.
, 1969, “Dynamically Loaded Journal Bearings: Maximum Film Pressure,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, Vol. 91, pp. 534–543.
3. Booker
J. F.
, 1971, “Dynamically Loaded Journal Bearings: Numerical Application of the Mobility Method,” ASME JOURNAL OF LUBRICATION TECHNOLOGY, Vol. 93, pp. 168–176.
4. Conway-Jones
J. M.
, MartinF. A., and GojonR., 1991, “Refinement of Engine Bearing Design Techniques,” Tribology International, Vol. 24, pp. 119–127.
5. Gupta, B. K., 1963 “Analysis of Dynamically Loaded Long and Short Bearings,” Ph.D. thesis, Cornell University, pp. 12–14.
Cited by
36 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献