Effect of Squealer Tip on Rotor Heat Transfer and Efficiency

Abstract

Calculations were performed to simulate the tip flow and heat transfer on the GE-E3 first stage turbine, which represents a modern gas turbine blade geometry. Cases considered were a smooth tip, 2% recess, and 3% recess. In addition a two-dimensional cavity problem was calculated. Good agreement with experimental results was obtained for the cavity calculations, demonstrating that the k-ω turbulence model used is capable of representing flows of the present type. In the rotor calculations, two dominant flow structures were shown to exist within the recess. Also areas of large heat transfer rate were identified on the blade tip and the mechanisms of heat transfer enhancement were discussed. No significant difference in adiabatic efficiency was observed for the three tip treatments investigated.