Affiliation:
1. Framatome Division Thermodyn, Le Creusot, France
Abstract
During full load shop tests under natural gas, two multistage centrifugal compressors exhibited subsynchronous vibrations. Both of them are low flow, high pressure, high rotational speed compressors, and are fitted with tilting pad bearings, and dry gas seals. A rotating stall problem was firstly eliminated by a modification of the diffuser geometry. Then, aerodynamic excitations caused the rotors to operate at their stability limit, and high vibration levels were observed at the first natural frequency. A complete rotordynamics analysis was performed in order to model precisely all the fluid-structure interactions. Modifications of the rotor designs were implemented, consisting in optimizing conveniently the bearing pads, replacing the toothed labyrinth seals of the balance pistons by damping honeycomb seals, fitting them with improved shunt hole systems. In addition, the dry gas seals were found to have been damaged, due to thermal effects, and further modifications were implemented to eliminate this problem. Final full load tests demonstrated a satisfactory behaviour of both centrifugal compressors.
Publisher
American Society of Mechanical Engineers
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献