Large Eddy Simulation of Film Cooling Over a Flat Plate in Supersonic Flow

Abstract

Abstract In the present work, large eddy simulation (LES) was performed to access the film cooling performance in the supersonic flow over a flat plate with a perpendicular slot injection configuration. The study was carried out for three mainstream Mach No.; Mα = 1.2, 2.67, and 3.3 and three coolant stream Mach No.: 0.05, 0.1, and 0.15. In supersonic flow, temperature rise inside the boundary layer is a major issue considering it causes high rates of heat transfer to the coolant film. To select a suitable LES sub-grid scale (SGS) model, LES results obtained from the present study using the LES SGS models such as Smagorinky-Lilly, wall adapted local eddy viscosity (WALE), and wall-modeled LES (WMLES) models were compared with DNS results of Keller and Kloker. The parametric study showed that the higher mainstream Mach No. caused increased wall temperature and reduced effectiveness. The film cooling effectiveness appeared to reduce almost by 10% when the mainstream Mach No. is increased from 1.2 to 2.67; however, no apparent difference was observed in effectiveness between the mainstream Mach No. 2.67 and 3.3. It was found that doubling and tripling the coolant stream Mach No. from 0.05 to 0.1 and 0.15, the length of potential core region also doubled and tripled, respectively, from 4 X/S to 8 X/S and 13 X/S and hence significant improvement in the film cooling effectiveness was observed.