Modeling of Static Stiffness for Linear Motion Roller Guide-Reference-Cited by-同舟云学术

Modeling of Static Stiffness for Linear Motion Roller Guide

Published:2019-08-31 Issue:11 Volume:141 Page:
ISSN:0742-4787
Container-title:Journal of Tribology
language:en
Short-container-title:

Author:

Jiang Shuyun¹,Wang Yao¹,Wang Yiming¹

Affiliation:

1. School of Mechanical Engineering, Southeast University, 2 Southeast Road, Jiangning District, Nanjing 211189, China

Abstract

Abstract The purpose of this study is to investigate the modeling method of static stiffness for the linear motion roller guide (LMRG) with five degrees-of-freedom (5DOF). The model of static stiffness for the LMRG with 5DOF was established using the slicing method, the guide deformation compatible equation, and the force equilibrium equation of the guide. The static stiffness of the LMRG was analyzed systematically via a case study, and the simulating results were verified by the experimental data. The results show that the proposed model can be used to calculate the complete static stiffness for the LMRG with 5DOF.

Funder

National Science Foundation of China

Publisher

ASME International

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Link

http://asmedigitalcollection.asme.org/tribology/article-pdf/doi/10.1115/1.4044292/5172653/trib-18-1368.pdf

Reference22 articles.

1. Prediction of Contact Stiffness in Bolted Interface With Natural Frequency Experiment and Finite Element Analysis;Zhao;Tribol. Int.,2018

2. Fractal Prediction Model for Tangential Contact Stiffness of Joint Surface Considering Friction Factors and Its Simulation Analysis;Li;Tribology,2013

3. Contact Surface Parameters Identification and Numerical Simulation of the Roller Linear Guides;Zhang;Mach. Tool Hydraul.,2017

4. Experimental Research on the Dynamic Stiffness of Rolling Guide’s Joint;Guo;Mach. Des. Manuf.,2011

5. Dynamic Characteristics of Ultra-Precision Machine Tools (Evaluation for Stiffness of Guideways by Impact Test);Kai;Trans. Jpn. Soc. Mech. Eng.,2013

Cited by 17 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Dynamic analysis of the machine tools load-bearing system considering the ball arrangement and carriage flexibility;Tribology International;2024-12

2. Increasing the service life prediction accuracy of linear guideways considering real operating conditions;Mechanism and Machine Theory;2024-10

3. Modeling and experimental verification of static and dynamic characteristics of the linear rolling guideway;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2024-04-02

4. Research on nonlinear static and dynamic characteristics of linear guideway in machine tools considering carriage flexibility;Nonlinear Dynamics;2024-01-18

5. Increasing the Service Life Prediction Accuracy of Linear Guideways Considering Real Operating Conditions;2024