Affiliation:
1. Texas A&M University Department of Mechanical Engineering, , College Station, TX 77843
Abstract
AbstractThis paper studies the effects of plasma-induced cracks on rock cutting to support the concept of a plasma-integrated drag bit for accelerated geothermal drilling through hard rocks. For this, a single polycrystalline diamond compact (PDC) drilling technique is used in cutting granite to compare thrust and cutting forces between plasma-treated and untreated rock samples. The cracks are produced using underwater plasma at 80 J per pulse. This energy level does not produce visible damage to the rock. The cutting tests are conducted at a cutting speed of 12.7 m/min and four feed rates of 0.127, 0.201, 0.267, and 0.414 mm/s to represent actual drilling scenarios. The results show a general trend of reduction in both thrust and cutting forces for these feed rates, but the magnitude of reduction highly depends on the feed rate. The maximum force reduction of around 50% is found at the 0.267 mm/s feed rate with statistical significance. Cases with a higher force reduction are also found to have rougher surface topography, which indicates more excessive fracturing and, thus, a cracks-accelerated material removal process. This study provides initial evidence of using underwater plasma to increase the downhole drilling rate of hard rocks.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Mechanical Engineering,Control and Systems Engineering
Reference40 articles.
1. The Status and Future of Geothermal Electric Power;Kutscher,2000
2. Geothermal Energy for the Benefit of the People;Fridleifsson;Renewable Sustainable Energy Rev.,2001
3. Geothermal Drilling Technology;Dunn,1986
4. Aerated Drilling Cutting Transport Analysis in Geothermal Well;Wakhyudin,2017
5. A Study of Geothermal Drilling and the Production of Electricity From Geothermal Energy;Pierce,1994