Evaluation of the Japanese Fatigue Test Data in Gr.91 for Elevated Temperature Design

Abstract

Abstract The ASME Boiler and Pressure Vessel Code (ASME BPVC) Section III, Division 5, Subsection HB, Subpart B provided only one design fatigue curve for Grade 91 steel (Gr.91) at 540 °C (or 1000 °F) in 2019 and earlier versions. To overcome this disadvantage, The ASME Section III Working Group on Creep-Fatigue and Negligible Creep (WG-CFNC) had taken an action to incorporate the temperature-dependent design fatigue curves for Gr. 91 developed by Japan Society of Mechanical Engineers (JSME) into ASME BPVC Section III Division 5. As a result, the temperature dependent design fatigue curves are provided in the 2021 edition of the ASME BPVC. To clear the features of the best-fit fatigue curve equation developed by the JSME, 305 data stored in the database were analyzed. Details of the database and relationship between the best-fit fatigue curve equation and the data including the statistic values and the values of 95% and 99% lower confidence bound calculated by failure probability assessment were clarified through analysis. In addition to the best-fit fatigue curve equation, an equation for dynamic stress-strain response showing the behavior of Gr.91 steel under cyclic loading of is also provided based on the same database. Moreover, some additional available data of fatigue and creep-fatigue tests obtained in Japan are also provided for considering the creep-fatigue damage evaluation under elevated temperature condition.