Shock Wave–Film Cooling Interactions in Transonic Flows
Author:
Ligrani P. M.1, Saumweber C.2, Schulz A.2, Wittig S.2
Affiliation:
1. Convective Heat Transfer Laboratory, Department of Mechanical Engineering, University of Utah, Salt Lake City, UT 84112 2. Lehrstuhl und Institute fu¨r Thermische Stroemungsmaschinen, Universitaet Karlsruhe (T.H.), Kaiserstrasse 12, D-76128 Karlsruhe, Germany
Abstract
Interactions between shock waves and film cooling are described as they affect magnitudes of local and spanwise-averaged adiabatic film cooling effectiveness distributions. A row of three cylindrical holes is employed. Spanwise spacing of holes is 4 diameters, and inclination angle is 30 deg. Free-stream Mach numbers of 0.8 and 1.10–1.12 are used, with coolant to free-stream density ratios of 1.5–1.6. Shadowgraph images show different shock structures as the blowing ratio is changed, and as the condition employed for injection of film into the cooling holes is altered. Investigated are film plenum conditions, as well as perpendicular film injection crossflow Mach numbers of 0.15, 0.3, and 0.6. Dramatic changes to local and spanwise-averaged adiabatic film effectiveness distributions are then observed as different shock wave structures develop in the immediate vicinity of the film-cooling holes. Variations are especially evident as the data obtained with a supersonic Mach number are compared to the data obtained with a free-stream Mach number of 0.8. Local and spanwise-averaged effectiveness magnitudes are generally higher when shock waves are present when a film plenum condition (with zero crossflow Mach number) is utilized. Effectiveness values measured with a supersonic approaching free-stream and shock waves then decrease as the injection crossflow Mach number increases. Such changes are due to altered flow separation regions in film holes, different injection velocity distributions at hole exits, and alterations of static pressures at film hole exits produced by different types of shock wave events.
Publisher
ASME International
Subject
Mechanical Engineering
Reference37 articles.
1. Norton, R. J. G., Forest, A. E., White, A. J., Henshaw, D. G., Epstein, A. H., Schultz, D. L., and Oldfield, M. L. G., 1990, “Turbine Cooling System Design, Vol. 1—Technical Report,” Report WRDC-TR-89-2109, Aero Propulsion and Power Laboratory, Wright Research Development Center, Air Force System Command, Wright-Patterson Air Force Base, OH. 2. Rigby, M. J., Johnson, A. B., and Oldfield, M. L. G., 1990, “Gas Turbine Rotor Blade Film Cooling With and Without Simulated NGV Shock Waves and Wakes,” ASME Paper No. 90-GT-78. 3. Abhari, R. S., and Epstein, A. H., 1994, “An Experimental Study of Film Cooling in a Rotating Transonic Turbine,” ASME J. Turbomach., 116, pp. 63–70. 4. Abhari, R. S.
, 1996, “Impact of Rotor–Stator Interaction on Turbine Film Cooling,” ASME J. Turbomach., 118, pp. 123–133. 5. Nix, A. C., Reid, T., Peabody, H., Ng, W. F., Diller, T. E., and Schetz, J. A., 1997, “Effects of Shock Wave Passing on Turbine Blade Heat Transfer in a Transonic Cascade,” AIAA Paper No. 07-0160.
Cited by
27 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|