Affiliation:
1. School of Aerospace and Mechanical Engineering Hankuk Aviation University Goyang, Gyeonggi-do, 412-791 Korea
2. +82-42-869-3043
3. Department of Mechanical Engineering Korea Advanced Institute of Science and Technology Daejeon, 305-701 Korea
Abstract
In the present study, fluid-flow and heat-transfer characteristics of a microchannel heat sink subject to an impinging jet are experimentally investigated. In order to evaluate the cooling performance of a microchannel heat sink subject to an impinging jet under the condition of fixed pumping power, the pressure drop across the heat sink and temperature distributions at its base are measured. Specifically, a microthermal sensor array is fabricated and used to accurately measure temperature distributions at the base of the heat sink. Based on these experimental results, a correlation for the pressure drop across a microchannel heat sink subject to an impinging jet and a correlation for its thermal resistance are suggested. In addition, it is shown that the cooling performance of an optimized microchannel heat sink subject to an impinging jet is enhanced by about 21% compared to that of the optimized microchannel heat sink with a parallel flow under the fixed-pumping-power condition.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference19 articles.
1. Heat Transfer in Electronic Systems;Chu
2. High-Performance Heat Sinking for VLSI;Tuckerman;IEEE Electron Device Lett.
3. Ultrahigh Thermal Conductance Microstructure for Integrated Circuits;Tuckerman
4. Manifold Microchannel Heat Sinks: Isothermal Analysis;Copeland;IEEE Trans. Compon., Packag. Manuf. Technol., Part A
5. Forced Air Cooling by Using Manifold Microchannel Heat Sinks;Pak;Adv. Electron. Circuit Packag.
Cited by
38 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献