Affiliation:
1. e-mail: George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405
Abstract
Polynomial profiles can be used as reference commands to limit induced vibration in flexible systems. Due to their ease of design and low-pass filtering effects, polynomial profiles are often found in cam-follower systems. Polynomial profiles have also been used as smooth reference commands for automated machines. However, despite extensive work to develop and improve such profiles, inherent tradeoffs still exist between induced vibration, rise time, and ease of design. Input shaping is an alternative method for generating motion commands that reduce residual vibration. This paper compares polynomial profiles to input-shaped commands for the application of reducing vibration in flexible systems. Analyses using Laplace transforms reveal that input shapers suppress vibration at regularly spaced frequencies. However, polynomial profiles do not share this property. Simulations and experimental results show that input shaping improves rise time and reduces residual vibration in comparison to polynomial profiles.
Subject
Computer Graphics and Computer-Aided Design,Computer Science Applications,Mechanical Engineering,Mechanics of Materials
Reference26 articles.
1. Influence of Cam Motions on the Dynamic Behavior of Return Springs;J. Mech. Des.,1998
2. Meckl, P. H., Arestides, P. B., and Woods, M. C., 1998, “Optimized S-Curve Motion Profiles for Minimum Residual Vibration,” American Control Conference, Philadelphia, PA.
3. Motion Profile Design to Reduce Residual Vibration of High-Speed Positioning Stages;IEEE/ASME Trans. Mechatron.,2009
4. Dynamic Synthesis of Cams Using Finite Trigonometric Series;ASME J. Eng. Ind.,1975
Cited by
14 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献