Affiliation:
1. Siemens Energy Canada Limited, Montréal, QC H9P 1A5, Canada
2. Department of Mechanical Engineering, McGill University, Montréal, QC H3A 0C3, Canada
3. Siemens Energy Canada Limited, Montréal, QC H9P 1A5, Canada; Department of Mechanical Engineering, McGill University, Montréal, QC H3A 0C3, Canada
Abstract
Abstract
Increasingly stringent regulations are imposed on nitrogen oxides emissions due to their numerous negative impacts on human health and the environment. Accurate, experimentally validated thermochemical models are required for the development of the next generation of combustors. This paper presents a series of experiments performed in lean, premixed, laminar, jet-wall stagnation flames at pressures of 2, 4, 8, and 16 atm. To target postflame temperatures relevant to gas turbine engines, the stoichiometry of the nonpreheated methane–air mixture is adjusted to an equivalence ratio of 0.7. One-dimensional (1D) profiles of temperature and NO mole fraction are measured via laser-induced fluorescence (LIF) thermometry and NO-LIF, respectively, to complement previously published flame speed data (Versailles et al., 2018, “Measurements of the Reactivity of Premixed, Stagnation, Methane-Air Flames at Gas Turbine Relevant Pressures,” ASME. J. Eng. Gas Turbines Power, 141(1), p. 011027). The results reveal that, as the pressure increases, the maximum postflame temperature stays relatively stable, and the concentration of NO produced through the flame front remains constant within uncertainty. Seven thermochemical models, selected for their widespread usage or recent date of publication, are validated against the experimental data. While all mechanisms accurately predict the postflame temperature, thanks to consistent thermodynamic parameters, important disagreements are observed in the NO concentration profiles, which highlights the need to carefully select the models used as design tools. The lack of pressure dependence of NO formation that many models fail to capture is numerically investigated via sensitivity and reaction path analyses applied to the solution of flame simulations. The termolecular reaction H+O2(+M)↔HO2(+M) is shown to hinder the production of atomic oxygen and to consume hydrogen radicals at higher pressures, which inhibits the formation of nitric oxide through the N2O pathway.
Subject
Mechanical Engineering,Energy Engineering and Power Technology,Aerospace Engineering,Fuel Technology,Nuclear Energy and Engineering
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献