Feasibility of Shape Memory Alloy Wire Actuation for an Active Steerable Cannula

Abstract

Needle insertion is used in many diagnostic and therapeutic percutaneous medical procedures such as brachytherapy, thermal ablations, and breast biopsy. Insufficient accuracy using conventional surgical cannulas motivated researchers to provide actuation forces to the cannula's body for compensating the possible errors of surgeons/physicians. In this study, we present the feasibility of using shape memory alloy (SMA) wires as actuators for an active steerable surgical cannula. A three-dimensional (3D) finite element (FE) model of the active steerable cannula was developed to demonstrate the feasibility of using SMA wires as actuators to bend the surgical cannula. The material characteristics of SMAs were simulated by defining multilinear elastic isothermal stress–strain curves that were generated through a matlab code based on the Brinson model. Rigorous experiments with SMA wires were done to determine the material properties as well as to show the capability of the code to predict a stabilized SMA transformation behavior with sufficient accuracy. In the FE simulation, birth and death method was used to achieve the prestrain condition on SMA wire prior to actuation. This numerical simulation was validated with cannula deflection experiments with developed prototypes of the active cannula. Several design parameters affecting the cannula's deflection such as the cannula's Young's modulus, the SMA's prestrain, and its offset from the neutral axis of the cannula were studied using the FE model. Real-time experiments with different prototypes showed that the quickest response and the maximum deflection were achieved by the cannula with two sections of actuation compared to a single section of actuation. The numerical and experimental studies showed that a highly maneuverable active cannulas can be achieved using the actuation of multiple SMA wires in series.