Affiliation:
1. Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10129, Italy e-mail:
Abstract
Several experimental apparatuses have been designed in the past to evaluate the effectiveness of under-platform dampers. Most of these experimental setups allow to measure the overall damper efficiency in terms of reduction of vibration amplitude in turbine blades. The experimental data collected with these test rigs do not increase the knowledge about the damper dynamics, and therefore, the uncertainty on the damper behavior remains a big issue. In this paper, a different approach to evaluate the damper–blade interaction has been put forward. A test rig has been purposely designed to accommodate a single blade and two under-platform dampers. One side of each damper is in contact with a ground support specifically designed to measure two independent forces on the damper. In this way, both the normal and the tangential force components in the damper–blade contact can be inferred. Damper kinematics is rebuilt by using the relative displacement measured between damper and blade. This paper describes the concept behind the new approach, shows the details of the new test rig, and discusses the blade frequency response from a new point of view.
Subject
Mechanical Engineering,Energy Engineering and Power Technology,Aerospace Engineering,Fuel Technology,Nuclear Energy and Engineering
Cited by
29 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献