Design of Spur Gears for Improved Efficiency-Reference-Cited by-同舟云学术

Design of Spur Gears for Improved Efficiency

Published:1982-10-01 Issue:4 Volume:104 Page:767-774
ISSN:0161-8458
Container-title:Journal of Mechanical Design
language:en
Short-container-title:

Author:

Anderson N. E.¹,Loewenthal S. H.²

Affiliation:

1. Propulsion Laboratory, AVRADCOM Research and Technology Laboratories, NASA Lewis Research Center, Cleveland, Ohio

2. NASA Lewis Research Center, Cleveland, Ohio

Abstract

A method to calculate spur gear system power loss for a wide range of gear geometries and operating conditions is used to determine design requirements for an efficient gearset. The effects of spur gear size, pitch, ratio, pitch-line-velocity, and load on efficiency are shown. A design example is given to illustrate how the method is to be applied. In general, peak efficiencies were found to be greater for larger diameter and fine pitched gears and tare (no-load) losses were found to be significant.

Publisher

ASME International

Link

http://asmedigitalcollection.asme.org/mechanicaldesign/article-pdf/104/4/767/5566430/767_1.pdf

Cited by 38 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Wind turbine gearbox oil temperature feature extraction and condition monitoring based on energy flow;Applied Energy;2024-10

2. Simulation of gear wear in lubricated conditions;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2024-06-17

3. Review and comparison of empirical friction coefficient formulation for multibody dynamics of lubricated slotted joints;Multibody System Dynamics;2024-05-10

4. Prediction of mechanical efficiency of spur gear pairs based on tribo-dynamics model of multi-tooth meshing;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2024-03-15

5. Time-Varying Meshing Stiffness and Dynamic Parameter Model of Spiral Bevel Gears with Different Surface Roughness;Applied Sciences;2024-02-14