A Mixed Soft Elastohydrodynamic Lubrication Model With Interasperity Cavitation and Surface Shear Deformation-Reference-Cited by-同舟云学术

A Mixed Soft Elastohydrodynamic Lubrication Model With Interasperity Cavitation and Surface Shear Deformation

Published:1999-04-22 Issue:1 Volume:122 Page:308-316
ISSN:0742-4787
Container-title:Journal of Tribology
language:en
Short-container-title:

Author:

Shi Fanghui¹,Salant Richard F.¹

Affiliation:

1. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332

Abstract

A deterministic mixed lubrication model, governing the interface between a moving smooth rigid surface and a stationary rough elastic surface, has been developed. Both the normal and shear deformations of the elastic surface are considered, as well as interasperity cavitation. Utilizing an analogy between the hydrodynamic lubrication (with cavitation) problem and the asperity contact problem, a generalized computational formulation is derived and a unique solution scheme constructed to solve these seemingly different problems. The model has been applied to the rotary lip seal, and used to predict the performance characteristics over a range of shaft speeds. [S0742-4787(00)04101-1]

Publisher

ASME International

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Link

http://asmedigitalcollection.asme.org/tribology/article-pdf/122/1/308/5822422/308_1.pdf

Reference30 articles.

1. Patir, N., and Cheng, H. S., 1978, “An Average Flow Model for Determine Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication,” ASME J. Lubr. Technol., 100, pp. 12–17.

2. Elrod, H. G. , 1979, “A General Theory for Laminar Lubrication with Reynolds Roughness,” ASME J. Tribol., 101, pp. 8–14.

3. Tripp, J. H. , 1983, “Surface roughness Effects in Hydrodynamic Lubrication: The flow Factor Method,” ASME J. Lubr. Technol., 105, pp. 458–465.

4. Greenwood, J. A., and Williamson, J. B. P., 1966, “Contact of Nominally Flat Surfaces,” Proc. R. Soc. London, Ser. A, 296, pp. 300–319.

5. Lee, S. C., and Cheng, H. S., 1992, “On the Load-Average Gap Relation Between Two Rough Contacts with Longitudinal Roughness,” STLE Tribology Transactions, 35, pp. 523–529.

Cited by 66 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Behavior of marine thruster lip seals under typical operating conditions;Tribology International;2025-01

2. An improved mixed lubrication model for revealing the mechanism of high speed and frictional heat on sealing performance;Tribology International;2024-03

3. Study on the prediction of high-speed rotary lip seal wear in aero-engine based on heat-fluid-solid coupling;Industrial Lubrication and Tribology;2024-01-10

4. Enhancing journal bearing performance through surface texturing: A comprehensive review of latest developments and future prospects;Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering;2023-11-07

5. Review of the evolution and prevention of friction, wear, and noise for water-lubricated bearings used in ships;Friction;2023-03-02