Corner Separation Control Using Sweeping Jet Actuator in a Compressor Cascade

Abstract

Abstract In the pursuit of advancing active flow control (AFC) technology, a more promising nonsteady actuator known as sweeping jet actuator (SJA) has been equipped on the endwall to manage the corner separation in a compressor cascade, while the steady jet actuators with holes were used for comparison. Experimental investigations have been conducted in a low-speed wind tunnel with an inflow Mach number of 0.23. Five-hole probe measurements and the oil flow visualizations were carried out to demonstrate the performance and physics of steady and unsteady blowing on controlling the corner separation. The transient data at the measurement plane were also obtained using the dynamic pressure sensors to get insight into the unsteady characteristics. Variation of jet momentum of both actuators and the excitation frequency of the SJA allows determination of favorable control parameters. Using the SJA with only 0.13% of the cascade mass flow, the total pressure loss which takes the additional energy input into account is reduced by 14.2%, while the steady jet achieves a reduction of 8.4%. The results highlight the superior characteristics of the SJA in controlling the corner separation.