Laser Vibrometry Measurements of Rotating Blade Vibrations

Abstract

One of the most important design factors in modern turbomachinery is the vibration of turbomachinery blading. There is a need for developing an in-service, noncontacting, noninterfering method for the measurement and monitoring of gas turbine, jet engine, and steam turbine blade vibrations and stresses. Such a technique would also be useful for monitoring rotating helicopter blades. In the power generation industry, blade failures can result in millions of dollars of downtime. The measurement of blade vibrations and dynamic stresses is an important guide for preventive maintenance, which can be a major contributor to the availability of steam turbine, gas turbine, and helicopter operations. An experiment is designed to verify the feasibility of such a vibration monitoring system using the reference beam on-axis laser-Doppler technique. The experimental setup consists of two flat, cantilever blades mounted on a hub attached to the shaft of a dc motor. The motor rests on a linear bearing permitting motion only in the direction of the motor shaft. The motor and blade assembly is then excited via an electrodynamic shaker at the first natural frequency of the blades. The resulting blade vibration is then detected using a laser vibrometer. The vibration frequencies and amplitudes of the two rotating blades are successfully measured.