Verification and further study on method of measuring contact force between mortise and tenon joint

Abstract

This work verified the direct measuring method of the contact force and its relaxation behavior between mortise and tenon joints through withdrawal load resistance testing of T-shaped mortise-and-tenon joint specimens. Further, it also studied the influence of wood species, beech (Fagus orientalis Lipsky) and Mongolian Scots pine (Pinus sylvestris var. mongolica), interference fitness (0.1, 0.2, 0.3, and 0.4 mm; 0.2, 0.4, 0.6, and 0.8 mm), and wood grain orientation (radial, diagonal, and tangential) on the contact force and its relaxation. The results showed that the direct measuring method had good feasibility for measuring the contact force and its relaxation of the beech and it showed good feasibility on measuring initial contact force of pine. However, it showed low feasibility for measuring the relaxed contact force when the interference was 0.2 mm, but showed good feasibility on measuring the relaxed contact force with larger interference of pine. Interference fitness, wood grain orientation, and wood species had a significant effect on initial contact force and contact force after 5 h relaxation. This study showed feasibility and application scope of the method for direct measuring contact force and provided additional fundamental data to contribute to further study of the internal mechanical mechanism of mortise and tenon joints.