Potential of hardwood kraft lignin as a bio-based dye for cotton fabrics

Abstract

The dyeing characteristics of hardwood kraft lignin (KL) were investigated on cotton fabrics, assessing its potential as a sustainable and environmentally friendly dye. Dyeability was evaluated by varying the KL concentrations, temperature, and time. An aqueous solution of Na2CO3 (1.0%) as the dye bath and a fabric-to-liquor ratio of 1:50 were used. Cationizing effects were studied using (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHPTAC), and the mordanting effects of various mordants were also evaluated. Post-mordanting was performed with FeSO4, FeCl2, Fe-lactate (Fe-lac), MgSO4, CuCl2, CuSO4, and Al2(SO4)3. A mordant concentration of 1 mM o.w.f. (0.5 mM for Al2(SO4)3), with a liquor ratio of 1:30, at 60 °C for 30 min were employed. Suitable dyeing conditions were 2.0% o.w.b., 90 °C, and 90 min, resulting in a brownish color of the cotton fabric. The fabrics exhibited a range of light brown to light grayish brown colors and showed lighter colors than the untreated fabrics when mordanted with MgSO4 and Al2(SO4)3. The color difference (ΔE) between cationized and uncationized cotton fabrics was 3.48. From the colorfastness assessment, KL-dyed cotton fabric showed good rubbing and washing fastness for staining, but poor light and washing fastness for fading.